Rapid dog bar backs on Boxercup
Moderators: slparry, Gromit, Paul
-
Doctor Hfuhruhuhr
- Posts: 36
- Joined: Fri Mar 09, 2012 1:47 pm
- Location: Waterlooville
Rapid dog bar backs on Boxercup
Just bought some barbacks off ebay and want to fit to rwb Boxercup,got the bars above yoke at the moment so brake lines may be long enough have looked at the rapid dog website as to concern over throttle cable length. I know some of you have fitted these just wanted to know if it is only the brake lines that may need to be extended, Thanks Vic
Only the brake line potentially needs to be longer but I seem t recall that the throttle cable needs to be rerouted somehow as it becomes a bit tight. Sorry it's been a long time since I did mine and the bike is long gone now. Hopefully someone shall be along to confirm or deny.
R1200GS TC. Triple Black
R1200S. It’s gone. Had it 11yrs. My favourite bike in 42yrs riding.
Holdsworth professional
Motobecane C3
Brompton
R1200S. It’s gone. Had it 11yrs. My favourite bike in 42yrs riding.
Holdsworth professional
Motobecane C3
Brompton
I did reroute the throttle cable . I've no routing details it's that long ago but if you fit the bars it 'll be obvious on full lock if there's a problem... I didn't need a longer cable though..
_________________
Nigel
Keep smiling, it makes people wonder what you've been up to!
1999 R1100s (mandarin) '
2018 DL 250V Strom
2019 CB125F Honda.
MZ301 Saxon Fun ( currently retired)
'03 Bullet 65 project..
Nigel
Keep smiling, it makes people wonder what you've been up to!
1999 R1100s (mandarin) '
2018 DL 250V Strom
2019 CB125F Honda.
MZ301 Saxon Fun ( currently retired)
'03 Bullet 65 project..