Got a technical query? Found another 0.02bhp? Ask/tell the world.
Moderators: slparry , Gromit , Paul
el-nicko
Member
Posts: 1562 Joined: Tue Mar 13, 2012 3:04 pm
Location: Nick from HEREFORDSHIRE, The Oceanian province of Airstrip One.
Post
by el-nicko » Mon Sep 10, 2012 1:36 pm
Last edited by
el-nicko on Wed Nov 07, 2012 12:44 pm, edited 3 times in total.
.
Mr. Spock is my role model so be advised; I possess no (discernible) sense of humour.
It's all VFR (DCT) round here now. STILL missing my 1100s tho.
Dog Tyred
Member
Posts: 2696 Joined: Wed Jan 18, 2006 12:27 pm
Location: Tamuff
Post
by Dog Tyred » Mon Sep 10, 2012 2:41 pm
Take the sprocket covers off and have a look at the back of the sprockets. If they don't look like the ones shown on the Boxer Pereformance website
http://www.boxer-performance.com/products.htm
then they are not Rocket Sprockets.
DT
Ride like your life depended on it.
2002 BCR
Dai wiskers
Member
Posts: 1262 Joined: Mon Jul 09, 2012 7:21 pm
Location: Caerphilly
Post
by Dai wiskers » Mon Sep 10, 2012 4:56 pm
Not easy to tell from the pics
Probably the best way to tell is to open the throttle on a flat road at 2000 revs top gear mine will pull with very little complaint even two up and will pull smooth from 2500
But mine's not stock in other ways, this may have a bearing on things,
Hopefully someone will be along that can give you a better discription
from memory i think the OEM sprockets have bigger arrow markings on them but you won't notice this without having both sets there, the later rocket sprockets have five holes plus the centre bolt hole the earlier one's had four the OEM have four offset holes again doubtfull if you would notice this when fitted also the OEM one's have the positioning lug pressed in the rocket sprockets have a pin sweated in again not noticable when fitted
Hope this helps Dai
Hayden
Member
Posts: 767 Joined: Tue Mar 04, 2008 12:10 pm
Location: Birmingham
Post
by Hayden » Mon Sep 10, 2012 8:49 pm
I believe DT has some waiting to be fitted, I have some of the OE kicking about somewhere, if you can wait till the weekend perhaps one of us could post a comparrison photo..
buzzz90
Posts: 167 Joined: Thu Aug 25, 2011 7:17 am
Location: France
Post
by buzzz90 » Tue Sep 11, 2012 7:30 am
el-nicko wrote: How can I tell if my second-hand bike does not have them fitted already?
If you can wait until this evening I can post a comparative pic I had taken while I was fitting my sprockets.
R1100S / VIN ZA82517 :
oyster
Posts: 1236 Joined: Fri Jul 02, 2004 1:03 pm
Location: retirementland kent
Post
by oyster » Tue Sep 11, 2012 8:27 am
Here you go:
OE
Rocket Sprockets
Note the OE has an indent to locate the sprocket; Lennies has a pin. The end of the pin is visible as the sprocket is rotated.
Oyster. 1999 R1100S. Almost original.
el-nicko
Member
Posts: 1562 Joined: Tue Mar 13, 2012 3:04 pm
Location: Nick from HEREFORDSHIRE, The Oceanian province of Airstrip One.
Post
by el-nicko » Tue Sep 11, 2012 12:52 pm
Hmmm, looks like the nut has to be removed to see it tho?
.
Mr. Spock is my role model so be advised; I possess no (discernible) sense of humour.
It's all VFR (DCT) round here now. STILL missing my 1100s tho.
Hayden
Member
Posts: 767 Joined: Tue Mar 04, 2008 12:10 pm
Location: Birmingham
Post
by Hayden » Tue Sep 11, 2012 2:26 pm
Just compare alignment arrow styles
Dog Tyred
Member
Posts: 2696 Joined: Wed Jan 18, 2006 12:27 pm
Location: Tamuff
Post
by Dog Tyred » Tue Sep 11, 2012 2:36 pm
Errrrrrrr......not wishing to state the bleeding obvious here but the Rocket Sprockets have BP1 (Boxer Performance) stamped into them!
DT
Ride like your life depended on it.
2002 BCR
Daveg2812
Member
Posts: 1483 Joined: Mon Apr 27, 2009 3:03 pm
Location: Doncaster
Post
by Daveg2812 » Tue Sep 11, 2012 3:18 pm
Dog Tyred wrote: Errrrrrrr......not wishing to state the bleeding obvious here but the Rocket Sprockets have BP1 (Boxer Performance) stamped into them!
DT
Well one of them does
This ain't Twitter you know!
2003 R1100S with some bits on.
el-nicko
Member
Posts: 1562 Joined: Tue Mar 13, 2012 3:04 pm
Location: Nick from HEREFORDSHIRE, The Oceanian province of Airstrip One.
Post
by el-nicko » Tue Sep 11, 2012 6:14 pm
Daveg2812 wrote: Dog Tyred wrote: Errrrrrrr......not wishing to state the bleeding obvious here but the Rocket Sprockets have BP1 (Boxer Performance) stamped into them!
DT
Well one of them does
Strange tho,:? Why stamp one and not the other
.
Mr. Spock is my role model so be advised; I possess no (discernible) sense of humour.
It's all VFR (DCT) round here now. STILL missing my 1100s tho.
Dog Tyred
Member
Posts: 2696 Joined: Wed Jan 18, 2006 12:27 pm
Location: Tamuff
Post
by Dog Tyred » Tue Sep 11, 2012 7:09 pm
Both of mine are stamped BP1.
DT
Ride like your life depended on it.
2002 BCR
Dai wiskers
Member
Posts: 1262 Joined: Mon Jul 09, 2012 7:21 pm
Location: Caerphilly
Post
by Dai wiskers » Tue Sep 11, 2012 7:17 pm
oyster wrote: Here you go:
OE
Rocket Sprockets
Note the OE has an indent to locate the sprocket; Lennies has a pin. The end of the pin is visible as the sprocket is rotated.
I think these two are from different batches as the arrow's are stamped differently
Where's Mr Lennon when we need him?
nab 301
Member
Posts: 2375 Joined: Sat Dec 04, 2004 6:41 pm
Location: Dublin Ireland
Post
by nab 301 » Tue Sep 11, 2012 7:46 pm
el-nicko wrote: How can I tell if my second-hand bike does not have them fitted already?
Check the valve timing...
_________________
Nigel
Keep smiling, it makes people wonder what you've been up to!
1999 R1100s (mandarin) '
2018 DL 250V Strom
2019 CB125F Honda.
MZ301 Saxon Fun ( currently retired)
'03 Bullet 65 project..
lennie
Posts: 85 Joined: Fri Sep 15, 2006 10:35 pm
Location: Australia
Post
by lennie » Thu Sep 20, 2012 12:25 am
All sprockets up to the newest batch will have one or both sprockets stamped with BP1 as stated and it is not covered by the retaining bolt and washer.
If not fitted, send me an email and order a set as you will be happy with the result.