advice for exhaust 'mamola rep'

Noel Brodigan · Post by **Noel Brodigan** » Mon Oct 29, 2007 5:19 pm

Hello lads. I am new to this site and I am looking for a bit of advice please. I have recently bought a 'Mamola' rep boxer cup and I am looking for some suggestions about suitable exhaust systems. Will I be able to just bolt on some end cans to the laser system which is on the bike, or do I have to change the whole system? I would'nt mind finding a bit more power and a bit more noise. Any suggestions welcome. . . .

Me-109 · Post by **Me-109** » Tue Oct 30, 2007 12:15 am

Noel Brodigan wrote:I would'nt mind finding a bit more power. .

Join the queue

Oh .....welcome.

Dog Tyred · Post by **Dog Tyred** » Wed Oct 31, 2007 11:03 am

Welcome to the site Noel

Does your bike still still have the Cat fitted? If so, removing that and fitting a 'Y' piece will liberate a few more decibels and make the the engine more responsive.

I have recently fitted Laser end cans and Remus y piece to mine and the difference is quite noticeable.

As for more power.........buy a 1200S

it'll probably cost about the same in the long run as you'll spend loads trying to increase the power of the 1100 by more than a few bhp and the 1200 comes with 122bhp as standard

Noel Brodigan · Post by **Noel Brodigan** » Wed Oct 31, 2007 7:00 pm

Hi, thanks for that. No sign of a CAT,think i just need a few end cans.Got a quote for end cans from Crossans in Newry NI, well over 1000 stg, any suggestions. Another question!, is there a Baglux tank cover available for the Randy Mamola. Thanks lads, Noel

Cobbster · Post by **Cobbster** » Wed Oct 31, 2007 8:01 pm

Hi Noel,

RE the Baglux cover, yep they do one but try these lot first www.topsaddlery.co.uk their alot cheaper than baglux but deliver much the same.

Cheers, cobbster

Dog Tyred · Post by **Dog Tyred** » Wed Oct 31, 2007 11:07 pm

Noel Brodigan wrote:Hi, thanks for that. No sign of a CAT,think i just need a few end cans.Got a quote for end cans from Crossans in Newry NI, well over 1000 stg, any suggestions. Another question!, is there a Baglux tank cover available for the Randy Mamola. Thanks lads, Noel

Noel
As Cobster said there is a Randy bagster tankcover available and guess what? I have a brand new one for sale

It has never been fitted to the bike (as I don't have a bagster bag

) and yours, or anyone elses interested for that matter, for the bargain price of £50 plus postage

Nu2

tripe · Post by **tripe** » Fri Nov 02, 2007 5:32 pm

welcome to the sit I picked up most of the bits I've added to my S from here but ebay usually has somethin such as
http://cgi.ebay.co.uk/SCARICO-LASER-PER ... dZViewItem

also a laser Y piece is listed in there somewhere,

good luck and have fun
Henry

robk321 · Post by **robk321** » Fri Nov 16, 2007 11:10 am

hello all,

I am also new to this site and have just bought my first boxercup , which I love already!

I am a bit confused by the various exhaust methods. Is the ebay picture above a Laser exhaust with Y piece that goes on a cat removed bike?

The picture above is exactly what I have and I am trying to establish exactly what it is.( sorry if thats a bit of a thick question , but as I say I am new to all this)

Also is it easy to check if I have the Laser chip or the original fitted and if so how?

many thanks,

rob

www.boxertrix.com

advice for exhaust 'mamola rep'

advice for exhaust 'mamola rep'

Re: advice for exhaust 'mamola rep'

laser exhaust