How Long To Simmer For ?

Got a technical query? Found another 0.02bhp? Ask/tell the world.

Moderators: slparry, Gromit, Paul

JoeC
Posts: 540
Joined: Mon May 22, 2006 1:50 pm
Location: The Home of Ferodo

How Long To Simmer For ?

Post by JoeC »

This is my first winter with the R and am not too sure how long to leave it to idle in these cold mornings. Currently I start it up just as I put my gloves on and leave it on the half choke position, in reality it is probably running for about 1 minute. I run it on this half choke for about 300 metres or until it runs OK.
Any suggestions and experieces would be greatfully received.
No longer a motorcycle owner.
User avatar
julian
Member
Posts: 1210
Joined: Sun Feb 22, 2004 7:25 pm
Location: W. London

Post by julian »

I just start mine and ride it like it says in the manual. Be a bit sympathetic with the revs for the first few miles.

If you search on the Pelican and /or ADVRider you will see storys and pictures of boxers that have caught fire through PROLONGED idling. I believe that the US bikes have a warning sticker stating that idling is not permitted due ot fire risk.
BMW R1100S (Black)
Suzuki TL1000S (Red)
User avatar
madman
Posts: 510
Joined: Sat Aug 21, 2004 8:21 am
Location: Dordogne, France

Post by madman »

The length of time that you should leave it to idle is exactly zero. The engine will warm up quicker under load and these days nearly every manufacturer of cars and bikes, say don't leave it on idle to warm up.
2004 Silver (mine)
2001 Silver/Manderin (hers)
Visiting France? Read my blog on http://bikesindordogne.blogspot.com
Adski
Posts: 101
Joined: Thu Jan 12, 2006 10:56 am

Post by Adski »

I start mine before putting my gloves on, giving her just enough time to let the oil circulate (15 seconds or there abouts) then ride off, knocking the idle up off when I pull away.
This doesn't actually change depending on the time of year as she seems to run the same.
I never know the best way to start her when semi-warm though! With the position of the starter switch a little bit of throttle isn't easy but it seems silly using the idle up.
Mr Sensible.
User avatar
sproggy
Posts: 424
Joined: Thu Jul 06, 2006 8:41 am
Location: Welwyn Garden City

Post by sproggy »

Adski wrote:...just enough time to let the oil circulate (15 seconds or there abouts)
If your oil takes 15 seconds to circulate after startup I'd start saving for a new engine......
User avatar
Gromit
Posts: 5702
Joined: Mon Feb 16, 2004 8:33 pm
Location: Lincs, me duck

Post by Gromit »

1. Put togs on (inc gloves)
2. Sit on bike, lifting it from its sidestand
3. Turn key, hit starter
4. Flick up s/stand
5. Blip throttle very gently
6. Put into gear
7. Ride away gently

I thangwe. :)
Adski
Posts: 101
Joined: Thu Jan 12, 2006 10:56 am

Post by Adski »

sproggy wrote:If your oil takes 15 seconds to circulate after startup I'd start saving for a new engine......
Wll I've no idea how long it takes...but that's what I deem to be "enough" for a warm up before riding away. :)
Mr Sensible.
User avatar
nab 301
Member
Posts: 2375
Joined: Sat Dec 04, 2004 6:41 pm
Location: Dublin Ireland

Re: How Long To Simmer For ?

Post by nab 301 »

JoeC wrote:This is my first winter with the R and am not too sure how long to leave it to idle in these cold mornings. Currently I start it up just as I put my gloves on and leave it on the half choke position, in reality it is probably running for about 1 minute. I run it on this half choke for about 300 metres or until it runs OK.
Any suggestions and experieces would be greatfully received.
As has been said , just start and go, taking it easy for the first mile or two. The choke as you call it is not actually a choke but a fast idle lever connected to the throttle cable junction box.
Nigel B
_________________
Nigel

Keep smiling, it makes people wonder what you've been up to!
1999 R1100s (mandarin) '
2018 DL 250V Strom
2019 CB125F Honda.
MZ301 Saxon Fun ( currently retired)
'03 Bullet 65 project..
User avatar
Boxadog 2000
Member
Posts: 1908
Joined: Wed Feb 18, 2004 8:29 pm
Location: Looking over hedges

Post by Boxadog 2000 »

Like wot Gromit said.
User avatar
Blackal
Posts: 8261
Joined: Fri Jul 29, 2005 7:53 pm

Post by Blackal »

Gromit wrote:1. Put togs on (inc gloves)
2. Sit on bike, lifting it from its sidestand
3. Turn key, hit starter
4. Flick up s/stand
5. Blip throttle very gently
6. Put into gear
7. Ride away gently

I thangwe. :)
Right................that explains something:

1) Put togs on :)
2) sit on bike (no centre stand) :)
3) Turn key, hit starter :)
4) Put into gear :?
5) Flick up side stand :oops:
6) Re-start engine :?
7) Put into gear (again)

Ride off (hoping neighbours aren't watching) :D

Al :D
If I am ever on life support - Unplug me......
Then plug me back in..........

See if that works .....
:?
User avatar
Gromit
Posts: 5702
Joined: Mon Feb 16, 2004 8:33 pm
Location: Lincs, me duck

Post by Gromit »

LOL @ Al :D

I forgot point 8...

After 3 or 4 miles of taking gently...

...rag the living crap out of it. ;)
User avatar
PBBoxer
Posts: 3211
Joined: Wed Mar 03, 2004 5:41 pm
Location: Yorkshire

Post by PBBoxer »

You're all very naughty

Coax the bike, never ever rev it

Be gentle

etc
1997 CBR1100XXV
1999 CBR1100XX
2009 HP2 Sport
2006 R1200s
2013 R1200RT anniversary
User avatar
Nero
Posts: 190
Joined: Thu Mar 24, 2005 8:56 pm
Location: Within spitting distance of Boxhill

Post by Nero »

PBBoxer wrote:You're all very naughty

Coax the bike, never ever rev it

Be gentle

etc
Hmm,

Start bike, no sitting around waiting, but gentle pootle down to A24 (half a mile max), RB whizz's past, rag the bollocks off it to catch up for a spirited ride into London, not once breaking a speed limit. :wink:

Nero
Post Reply Previous topicNext topic