Rough or refusal to run

Got a technical query? Found another 0.02bhp? Ask/tell the world.

Moderators: Gromit, Paul, slparry

Wilsonsp2
Posts: 12
Joined: Sat Sep 26, 2020 5:39 pm

Rough or refusal to run

Postby Wilsonsp2 » Tue Aug 27, 2024 10:02 am

Returning home from Scotland on the normal reliable R1200S, it first started running roughly and would only idle at about 2500rpm - awkward for riding thro Glasgow on a Saturday! It calmed down over my lunch but by the time I reached Gretna Green it wouldn’t idle at all, and stalled whenever it could. As I reached home (Preston), it was back to idling at 3500rpm. I’ve now got a Fault Code reading of 271a Oxygen Sensor. Any thoughts or experience, please - otherwise it’s a skip.

dobbo
Posts: 61
Joined: Fri Aug 06, 2021 12:25 pm

Re: Rough or refusal to run

Postby dobbo » Tue Aug 27, 2024 11:59 pm

Could it be an air leak on the intake side? Check the caps covering the vacuum gauge connection, rubber manifolds etc.

User avatar
slparry
Moderator
Posts: 6691
Joined: Sat Sep 20, 2008 7:19 pm
Location: Wrexham
Contact:

Re: Rough or refusal to run

Postby slparry » Wed Aug 28, 2024 8:35 am

or even a duff lambda sensor, I had one on my F800GS once and it was a pita at low speed running. Plugged the GS911 in and the output from it was jumping all over the place so no wonder the ECU was getting confused
--
Steve Parry


Current fleet: '14 F800GS, '87 R80RS, '03 R1100S BoxerCup, '15 R1200RT LE Dynamic, '90 K1, '05 K1200S

Humbug
Member
Posts: 658
Joined: Wed Oct 28, 2015 6:06 pm
Location: Nottinghamshire

Re: Rough or refusal to run

Postby Humbug » Wed Aug 28, 2024 1:24 pm

Possibly a coil? mine would cut out any opportunity until I found one of the coils duff. Just pulled them off one at a time and listened for any change in engine note. It was a bit erratic as to when it would cut out, maybe temperature?
11 plate KTM SMT


Return to “Boxertech”

Who is online

Users browsing this forum: No registered users and 120 guests