Bellypan stickers

das bike u1100s · Post by **das bike u1100s** » Wed Mar 04, 2015 4:47 pm

I am having my BCR belly pan re sprayed, having looked about for the transfers, I found this old link. are they any good?
I see Dave the German may have purchased them for his bcr, any thoughts?
Paul

Blackal · Post by **Blackal** » Wed Mar 04, 2015 5:07 pm

See the thread by Boxerscott on the subject.

He got them made up local to him if I remember correctly - and they were good.

Thread's here, but I'm not sure if he mentioned who did the decals - PM him, or wait until he gets home from the pub - and logs in

viewtopic.php?t=15771&highlight=decals

Al

das bike u1100s · Post by **das bike u1100s** » Wed Mar 04, 2015 6:41 pm

Thanks Al.
the ones dave the german looked ok on the firms website although they have gone up a £10 from when he purchased some.
its good to get some actual feedback (how I hate that term!) from people who have purchased them.
Wont pester Boxerscott, but hopefully he will see this on his return from drinking mineral water & give his thoughts, on the decals, not the mineral water.
The guy who is doing the respray, which reminds me does anyone have the colour codes for the red & blue from bm, he has suggested once resprayed, having this plastic film fitted to the most exposed parts to protect from further chipping, anyone had this done?
Paul

Blackal · Post by **Blackal** » Wed Mar 04, 2015 7:17 pm

Just spoken to Chris (Boxerscott) and he should be on the site later, so can give the name of the place in Galashiels that did ours. He should also have the colour codes.

Al

dave the german · Post by **dave the german** » Wed Mar 04, 2015 7:30 pm

The ones from bike decals are for the randy BCR - Chris got his from Advanced signs in Galashiels. I got some from the same company and put a post in the "recommended products" section. They have them saved on computer so won't be a problem. When I got them they charged £1.50 per sticker plus postage

dave the german · Post by **dave the german** » Wed Mar 04, 2015 7:36 pm

das bike u1100s wrote:Thanks Al.
the ones dave the german looked ok on the firms website although they have gone up a £10 from when he purchased some.
its good to get some actual feedback (how I hate that term!) from people who have purchased them.
Wont pester Boxerscott, but hopefully he will see this on his return from drinking mineral water & give his thoughts, on the decals, not the mineral water.
The guy who is doing the respray, which reminds me does anyone have the colour codes for the red & blue from bm, he has suggested once resprayed, having this plastic film fitted to the most exposed parts to protect from further chipping, anyone had this done?
Paul

Just read the full post - check RS motorcycle paints. If you put the year/model etc into the search, it gives the codes -oops just found codes
Pacific Blue 441
alpine White 300
Marakesh Red 392
I;m going to get the plastic put on mine when I get around to it
The company I spoke with (Owen Pilling Graphics in Lanark) suggested some film which they use on prestigous cars to prevent stone chips - it was bout £80 for a 1mtr by 1.2mtr length

das bike u1100s · Post by **das bike u1100s** » Wed Mar 04, 2015 8:28 pm

Thanks all, help appreciated.
Paul

andy griff · Post by **andy griff** » Wed Mar 04, 2015 8:55 pm

Paul,

I am looking to restore a BMW K1100RS and live in Sussex. Do you know a good sprayer near you as I am trouble finding someone who is both good and not mega expense .

Andy

Mitch1100 · Post by **Mitch1100** » Wed Mar 04, 2015 10:25 pm

ned1 wrote:Hi, Try here, they have listed, Boxer cup & Power cup kits

www.bikedecals.co.uk

then click on Race Replica Kits on the left.

Hope this helps

Ned

[

][/img]

das bike u1100s · Post by **das bike u1100s** » Sat Mar 07, 2015 4:42 pm

Andy, I am using a small firm based in my village, they are J Panther Associates. John can be reached on 01959 577518.
I have heard nothing but good comments for his work, he sprayed a small access platform for a local firm I used to work for and the results were excellent.
I am getting him to spray my belly pan and seat Cowell for me and has quoted what I consider a fair price for the work.
Paul

das bike u1100s · Post by **das bike u1100s** » Sat Mar 07, 2015 6:09 pm

Thanks Ned, are the pictures of your belly pan, the decals you obtained from bikedecals?
Paul

andy griff · Post by **andy griff** » Sun Mar 08, 2015 7:09 pm

Paul,

Cheers, I will give him a call and mention your name as recommending.

Andy

dave the german · Post by **dave the german** » Mon Mar 09, 2015 10:46 am

das bike u1100s wrote:Thanks Ned, are the pictures of your belly pan, the decals you obtained from bikedecals?
Paul

If you look at the bikedecals kit, the Minolta sticker is missing - they're for the Randy Mamola Boxercup - I priced the genuine stickers a couple of weeks ago

The stickers come in sets - the CFP, Minolta etc (5 in total) are about £90 (per side!!!!!!!) and the BMW Motorrad stickers are also per side - forget exactly how much they were but I think in total it's over £300

Taz · Post by **Taz** » Sun Mar 15, 2015 1:03 pm

Paul - I have sent you a PM regarding the guy you used for the belly pan.

Thanks

Peter.

www.boxertrix.com

Bellypan stickers

belly pan decals

Just missing MINOLTA

Stickers