Hi
If possible (mainly Northern peeps), may I borrow a rear and front paddock stand for a 1200s? I have one of each but want to swap over some wheels between 2 1200s.
Will only need them a day or so, any help much appreciated
PB
To Borrow please
Moderators: slparry, Gromit, Paul
To Borrow please
1997 CBR1100XXV
1999 CBR1100XX
2009 HP2 Sport
2006 R1200s
2013 R1200RT anniversary
1999 CBR1100XX
2009 HP2 Sport
2006 R1200s
2013 R1200RT anniversary
- thedukeofhunslet
- Posts: 88
- Joined: Wed May 09, 2007 12:50 pm
- Location: Hunslet, of course
-
- Posts: 3724
- Joined: Sat Apr 21, 2007 5:07 pm
- Location: scottish borders
- Contact:
To borrow please
If you have a front and rear already... with a bit of northern nouse it would not be too difficult to remove and intelligently support forks and rear with owt lying around (missus included). I use me car jack and 4x1 on crank case base to get front off then prop fork bottoms with a pig block and said bits of 4x1. Come on
us northerners were the foundation of the Empire!! (But be carefull of other partys bike)

Fiat Panda.
Fiat Scudo (with speedblock, pipe carrier, reversing sensors, reversing camera, tow bar, some new rust and Fake Plumber logo)
started out with nothing, still have most of it left.
Fiat Scudo (with speedblock, pipe carrier, reversing sensors, reversing camera, tow bar, some new rust and Fake Plumber logo)
started out with nothing, still have most of it left.