Has anyone fitted a goodridge hose or similar to the rear of their S?
From the master cylinder runs a metal pipe that ends in a block with a female thread. Into that goes what looks like a female to male adapter, then the standard hose screws onto that.
Will the thread at the end of the replacement hose go straight onto this adapter, or do I need to replace it, and if so - what thread size to what?
Would like to get the right bits all present and correct before I take it apart!
I've had a pipe made up so that I can junk all that metalwork and take the pipe from the master cylinder direct to the caliper.
Had the Goodrich system before which came with all the relevant banjo bolts - only had to send the kit back once coz their first attempt was for a pre 2001 model with the brembo badged calipers.
Lloyd
It's not how fast you ride, it's how you ride fast.
Light travels faster than sound. That's why some people appear
bright until you hear them speak.
I looked at the weekend. Is that a standard banjo bolt thread in the top of the master cylinder then? and have you had any sealing issues as the top of the master cylinder doesn't have a machined surface?
Would still prefer to get a line with the correct in-line connector if anyone knows what adaptor fits ...
