The search function didnt help, hence my post here.
Anyone have the 1200S front disc to wheel bolt torque setting handy please?
Google gave me 21 nm but that might have been for an 1100S.
Been meaning to buy a smaller torque wrench for years. My trusty old wrench bottom setting is 40nm so that day has finally arrived!
Im not going to guess with my brakes, the horn isnt that loud!
TIA.
Talk Torque
Moderators: slparry, Gromit, Paul
Cheers Gus, a virtual pint for you!
Didnt get time to finish it as i had to break off to get some dinner.
It took time to prep the wheel as the painter i use gave the job to his work shop numpty.
He didnt mask off the disc mounting areas so i had to clean them up and of course the threads were caked in paint. FFS, it got worse when i saw the bearing area. I wouldnt mind if it was mates rates but it wasnt exactly cheap.
Time for bed said Zeberdee zzzzzzzz.
Didnt get time to finish it as i had to break off to get some dinner.
It took time to prep the wheel as the painter i use gave the job to his work shop numpty.
He didnt mask off the disc mounting areas so i had to clean them up and of course the threads were caked in paint. FFS, it got worse when i saw the bearing area. I wouldnt mind if it was mates rates but it wasnt exactly cheap.
Time for bed said Zeberdee zzzzzzzz.