www.boxertrix.com

This is it's first outing owned it only 3 months, love riding it all ready.

Looks good. Im just wondering whether to paint my wheels or not, if I did it would be all black.

Dave

There where like that when I got the bike , all powered coated, including what looks like rim tape. Stunning job on them. They do grow on you. The belly pan is off at the moment for respray .

Looks good

Rim tape That may attract some 'flak' from the PC/Purist wing of Boxertrix tho mate.

el-nicko wrote: Rim tape That may attract some 'flak' from the PC/Purist wing of Boxertrix tho mate.

Those wheels certainly "lift" the DKR colour-scheme.

Just needs a graphic on the front flanks to relieve the bulk.

Looks good, though

Al

There be some trick bit's on there there be

Looks good

Blackal wrote:Just needs a graphic on the front flanks to relieve the bulk.

Looks good, though

Al

Trick bits Dai?

el-nicko wrote:

Blackal wrote:Just needs a graphic on the front flanks to relieve the bulk.

Looks good, though

Al

Trick bits Dai?

Without looking hard i can see exhaust, G,S, torque arm pannier rails and bottom mounts

el-nicko wrote: Rim tape That may attract some 'flak' from the PC/Purist wing of Boxertrix tho mate.

It's not rim tape i thought it was as well I was going to remove it . It is apart of the powder coating. It looks like powder coated red first all the wheel and black second.

Yes it as a few extras. Some not seen. Will be uploading a few more pics after Christmas .

I have done all the graphics and the belly pan is back from the painters.
Centre stand is now off the bike, as most of you know with the Torque arm fitted the wheels are not off the floor and just a balancing trick.

Exhaust is Remus , Enrichment plug, cat removed from new have all the parts. Heads have been ported and gas flowed . I believe it as the cam sprockets changed but not checked yet.

It's brother was raced and this was his spare bike. It only done 5800 miles.

TrickyDicky wrote:

el-nicko wrote: Rim tape That may attract some 'flak' from the PC/Purist wing of Boxertrix tho mate.

It's not rim tape i thought it was as well I was going to remove it . It is apart of the powder coating. It looks like powder coated red first all the wheel and black second.

Yes it as a few extras. Some not seen. Will be uploading a few more pics after Christmas .

I have done all the graphics and the belly pan is back from the painters.
Centre stand is now off the bike, as most of you know with the Torque arm fitted the wheels are not off the floor and just a balancing trick.




Exhaust is Remus , Enrichment plug, cat removed from new have all the parts. Heads have been ported and gas flowed . I believe it as the cam sprockets changed but not checked yet.

It's brother was raced and this was his spare bike. It only done 5800 miles.

Not even run in yet

Dai wiskers wrote:

TrickyDicky wrote:

el-nicko wrote: Rim tape That may attract some 'flak' from the PC/Purist wing of Boxertrix tho mate.

It's not rim tape i thought it was as well I was going to remove it . It is apart of the powder coating. It looks like powder coated red first all the wheel and black second.

Yes it as a few extras. Some not seen. Will be uploading a few more pics after Christmas .

I have done all the graphics and the belly pan is back from the painters.
Centre stand is now off the bike, as most of you know with the Torque arm fitted the wheels are not off the floor and just a balancing trick.




Exhaust is Remus , Enrichment plug, cat removed from new have all the parts. Heads have been ported and gas flowed . I believe it as the cam sprockets changed but not checked yet.

It's brother was raced and this was his spare bike. It only done 5800 miles.

Not even run in yet

That is very true. It will be going on a tour of Europe in the summer i hope.

Has you see i have a 02 boxer cup listed or is that a box of bits lol , bit it is a basket case at the moment. it was raced for a few years and is now stripped it as body work but very tatty.but all the parts are there.

Hugger, clear lenses, white faced clocks, fancy screen, seat cowl, head light protector, can i see a stearing damper as well,?
Like i said lots of trick bit's Dai

Dai wiskers wrote:Hugger, clear lenses, white faced clocks, fancy screen, seat cowl, head light protector, can i see a stearing damper as well,?
Like i said lots of trick bit's Dai

....Cylinder Head Protectors? Cheers Dai; saves the rest of us squinting. I remember, last Spring, when I bought my bike I knew nothing about the R1100s. I was just looking for a bike with shaft drive, one sided swing-arm and an under-seat exhaust. I looked at the '11s' and found it very pleasing to the eye. Only after several months ownership (and not being familier with a 'standard' bike) have I become aware that it had some non-original 'stuff' fitted. Lowered footrests and CF radiator intakes spring to mind and also, the handlebars seem to differ from some I've seen on ebay by having a short location lug instead of a threaded one. What any future owner will make of it's present state I can't imagine 'cos though it looks pretty 'standard', up to now I've added: 22 Litre tank, Odyssey battery, 5.5" back wheel, white-faced clocks, CF seat cowl, CF belly pan, front (disc lock) fender protectors, HID lights (both), uprated horns, 'Touring' luggage set, full Ventura luggage set, BMW tank bag, Large BMW holdall, the list goes on. Though I can't justify spending £1000-£2000 on upgrading my suspension, waiting in the wings are:- Crash bars, HID spots, 'City' lids, seat lowering kit, suspension lowering kit, coated exhaust and ( though I might just set my own sprockets up on a 'Bridgeport' and alter them myself) 'Lennies'. Hey- ho, it's only money.

Ah but Nick you have the option comfort bars not the standard below the yoke bars