Page 1 of 1
Clic clamps supplier
Posted: Tue Sep 18, 2012 9:26 am
by Dai wiskers
Good news for anyone who has been searching for a supplier of these clamps used on fuel lines etc.
From what i can make out these are all but unobtainable so people have been using jubile type clamps for fuel lines not the best idea as they can cut the fuel line not such a problem with carbed bikes, but ours use a fairly high pressure system.
Tha answer is the EASY CLIP-M available here
http://www.hclfasteners.co.uk/acatalog/shop.html
Another clamp you can use is the ear type clamp but these look nasty and are awkward to fit correctly
Hope this is of help Dai
Posted: Tue Sep 18, 2012 1:14 pm
by Boxermed69
Dai, are you referring to the 'compensating clamps', top right? They're the ones I've not been able to source in the past. Nice one, thanks.
Mike
Posted: Tue Sep 18, 2012 1:21 pm
by Dog Tyred
Dai
If you click on the top right image it takes you to a double wire spring clamp and not the shown in the original page??
Is this they type you were referring too??
DT
Posted: Tue Sep 18, 2012 4:14 pm
by Dai wiskers
I will have another check i can't find them now will be back when i do
Posted: Tue Sep 18, 2012 4:18 pm
by el-nicko
Dai wiskers wrote:I will have another check i can't find them now will be back when i do
"Snap Fit & Ear Clamps" Dai?
Posted: Tue Sep 18, 2012 4:18 pm
by Dai wiskers
Strange click on the top left it will take you here
http://www.hclfasteners.co.uk/acatalog/ ... lamps.html
Then go to the ezy click-m hose clip or just click this link
http://www.hclfasteners.co.uk/acatalog/Ezyclik-M.html
Postage is a bit steep but the overall price works out well
Posted: Tue Sep 18, 2012 4:23 pm
by Dog Tyred
Cheers for clarifying that Dai.
Thaink they need to sort their website out!!
DT
Posted: Tue Sep 18, 2012 4:44 pm
by Dai wiskers
el-nicko wrote:Dai wiskers wrote:I will have another check i can't find them now will be back when i do
"Snap Fit & Ear Clamps" Dai?
Ear clamps are a one use clamp
Posted: Tue Sep 18, 2012 4:47 pm
by Dai wiskers
Dog Tyred wrote:Cheers for clarifying that Dai.
Thaink they need to sort their website out!!
DT
Your right there but if you persevere[splin] you will get there in the end
Mind it will be easier to go through one website than search for days like i did i found these through an alfa romeo forum in the end
Posted: Tue Sep 18, 2012 10:16 pm
by boxerscott
When I changed my fuel filter I used 4mm cable ties on the lines inside the fuel tank. I pondered if the pvc cable tie was petrol resistant afterwards, so I placed a few in my plastic jerry can and they are still there. Good link though as I want some 22mm ones for the car
Posted: Wed Sep 19, 2012 3:03 pm
by Dai wiskers
Their sizings a bit out as well measure accross pipe you want to clamp buy that size clamps
Great service arrived next day any one need any 10.5 clamps
we need 11.5 or 12's just like we needed with the original clic clamps for fuel lines
Thinking on it i need 10.5's for the trike so wont go wasted
Cheers all dai
clamps
Posted: Thu Oct 18, 2012 1:35 pm
by dysondiver
that will be a handy link , be good for the gas hose on mig welding regs too.