Page 1 of 1
Staintune, Vanderlinde, Induct, chips and stuff!!!
Posted: Sun Jan 09, 2005 5:02 pm
by sandbar
Some interesting comparisons and charts on this site.
http://moto-one.com.au/performance/index.html#bmw
Brings some previous comments on this site into focus!
Sandbar
Posted: Sun Jan 09, 2005 5:31 pm
by Gromit
Excellent link Sandbar - seems my observations about the induct weren't that wide of the mark, which is encouraging as I normally wouldn't have a clue!!
The rich running at low speed/big throttle is definitely true, as the engine's lack of low down torque at such speeds shows.
Posted: Sun Jan 09, 2005 5:55 pm
by winger
Blimey I feel like someone has just dug up a corpse,and a decomposed one at that,it's bloody donkeys years old, and because of who did it and how,and their conections I'd class it as interesting but don't bet your house on it.
If you can go back five years over the Pelican you'd understand why,hence when people start useing owners web sites to sell their product,things can get very complicated.
Chris
Posted: Sun Jan 09, 2005 10:23 pm
by Boxadog 2000
Will be interesting to see the results If and when I get my Powercomander
based on my previous results with Techclusion.
If I new how I would post the dyno chart of the Techlusion results.
Posted: Mon Jan 10, 2005 9:25 am
by sandbar
Blimey I feel like someone has just dug up a corpse,and a decomposed one at that,it's bloody donkeys years old,
I knew the link was an old one, but I hadn't seen it before so I thought that others might not have seen it and it was therefore worth a post!
I would like to see dyno charts of Techlusion, because that is the way that I am thinking of going. Mine appears to be running weak, without any mods (yet!!) to the inlet, so the facility to weaken the mixture ( Power Commander) does not appear to be of relevance. My feeling is that the Techlusion that runs without the O2 sensor might be the best value way to go.
Sandbar
Posted: Tue Jan 11, 2005 1:53 am
by winger
Hi Sandbar
While the thread was an old one and maybe there are some out who hadn't seen it,the politics and the people involved are way to complicated to go through here,suffice to say some of the people who were supplying bits and to who,I wouldn't believe e'm if they told me what day of the week it was,hence one of the reasons I avoid the Pelican as much as possible,were most of the bits and pieces have been touted over the years.
And thats why, when i'm on a site and some turns up'Hello boys I'm the dealer fo so and so' I'm thinking jesus here we go again!!!
It's just that the Dudes on the Pelican were a little more subtle then that,haveing had my S for five years this month,it's the same old stuff 'What goes around comes around'and you need to know some history to get the full story.
Chris
Chris
Posted: Tue Jan 11, 2005 10:02 am
by sandbar
Chris,
I couldn't agree more!
suffice to say some of the people who were supplying bits and to who,I wouldn't believe e'm if they told me what day of the week it was,hence one of the reasons I avoid the Pelican as much as possible,were most of the bits and pieces have been touted over the years.
Point taken! It was just that there was a thread recently about the results of using the Induct not being quite what was expected. Some of the info on that link showed that even they could not make the Induct work properly on the dyno
And thats why, when i'm on a site and some turns up'Hello boys I'm the dealer fo so and so' I'm thinking jesus here we go again!!!
Er - not like me then?
it's the same old stuff 'What goes around comes around'and you need to know some history to get the full story.
So very, very true!!
Sandbar