Two Pipe System for Front Brakes

[snavetrauts]

Hi, Does anyone have a picture of the routing for the twin pipe system for the front brake..... I currently have the "across the mudguard" fixed pipe system and need to measure up the lengths etc etc.

Perhaps the BCR pipes would fit.. mine is a 2003 non abs bike??

Thanks for your help

Stuart

[horse27]

Hello mate ... I have a 2002 BCR and that has the across the mudguard link as well.

HEL do a two line kit (well, three if you want the back one) for the R1100S ... www.h-e-l.co.uk ... which I want to do sometime soon ... £70 for three lines isn't too bad either.

Always been pleased with them in the past and I have a local manufacturer (in Tadworth) that sells via eBay cheap(ish) and you get free stainless nipples (always a good thing )

HTH, H.[/url]

[snavetrauts]

Thanks Horse27 I have contacted them by e-mail asking for the lengths.... I have raised my bars above the yoke and needed to know the lengths.

I will keep the forum posted

Cheers again

Stuart

[Cobbster]

Hi all,

Try www.vyxxn.co.uk They supplied me with two HEL hoses for the front when I fitted my Rapid dog bar risers. I had them made to order in black covering and banjo's. £54 for both.

The R/H/S was 730mm long and the L/H/S 740mm. If your just lifting the bars above the top yoke then you can knock 20mm off both lengths. BMW built the R11 with three different variations of caliper in 2002/3 so I had to describe the banjo fittings to the guy at Vyxxn but they got it right first time, next day delivery too.

Cheers,cobbster.

[snavetrauts]

Cheers Cobster.. I will cal them too. So far HEL have not reponded!!

stuart

[horse27]

You could try my local HEL dealer (CMS in Tadworth)...

http://www.cmsheluk.co.uk/

They sell via eBay at £69 for three lines (inc. stainless bleed nipples)

Cheers.