R1200S Starlane Quick Shifter

bones78 · Post by **bones78** » Thu Jun 27, 2013 3:46 am

I bought a Starlane quick shifter for my race R1200S and cannot find a wiring diagram, nor am I any sort of electrician.
Anyone have any experience with this ?

http://www.starlane.com/vedit/15/cronom ... dprod~1075

Thanks for any help !

f90x · Post by **f90x** » Thu Jun 27, 2013 6:15 am

tanneman · Post by **tanneman** » Thu Jun 27, 2013 6:41 am

Welcome to the forum and if you don't mind introducing your self under the new trixters section.

Best is to buy a Haynes manual as it has all the wiring diagrams in it. This may help in a way but it doesn't give you the diagram.
http://www.maxbmwmotorcycles.com/fiche/ ... d=04302013

tanneman · Post by **tanneman** » Thu Jun 27, 2013 7:17 pm

Sorry Bones. I see you are state side. Would you accept copies from a Haynes manual to email to you or should I put it up here? At work at moment but I'll see what can be done.

gus · Post by **gus** » Thu Jun 27, 2013 7:35 pm

Hi
I have a cordona quickshifter on mine which is a s1000rr unit. If it cuts the spark then you need to wire into the coil caps , 4 in all . You may need some bmw connectors to do this neatly and correctly. Post some photos of the loom you have. I might be able to relate it to mine and give you some pointers.
Gus

bones78 · Post by **bones78** » Sat Jun 29, 2013 8:08 pm

Thanks Gus, but I have the Starlane piece working flawlessly. Thanks to all for the technical help !