Page 1 of 1
Belly pan - keep centre and side stand
Posted: Sat May 16, 2015 3:47 pm
by beachcomber
Any likely interest ??
I'm developing a belly pan for our own project which will have a cooling air intake [ x 2 ] at the front AND will allow the retention of both side and main stand ......... any interest ?
We're also looking at some heat protection material to protect paintwork from exhaust heat transfer.
I'll flag up some pix next week when the moulds are completed.
BTW - they will be GRP and will come in any colour as long as it's Black.
Posted: Tue Jun 30, 2015 9:10 pm
by bfisher
Any pictures TJ?
Posted: Wed Jul 01, 2015 9:17 am
by beachcomber
bfisher wrote:Any pictures TJ?
THE MOULDS ARE NOW COMPLETE [ caps lock off now !], we're finalising the air intakes / grills and the fittings to the front cover, brackets / fixings at the rear.
Pix up as soon as.
Posted: Fri Aug 21, 2015 3:04 pm
by Henners
Any more news on this?
Posted: Thu Sep 03, 2015 8:16 am
by beachcomber
Henners wrote:Any more news on this?
Hi
been away for a couple of weeks chill break in Saxony - back now. Moulds are completed and I will have pix up asap
Posted: Thu Sep 03, 2015 6:24 pm
by Henners
beachcomber wrote:Henners wrote:Any more news on this?
Hi
been away for a couple of weeks chill break in Saxony - back now. Moulds are completed and I will have pix up asap
Excellent ~ very interested ~ H
Posted: Sat Sep 05, 2015 8:08 pm
by beachcomber
Production moulds now completed - holes / vents optional !!!
Yes, retains both stand and comes with a full [ and foolproof ] fitting kit.
Details over in "Vendors" soon. Don't forget your 10% discount.
Posted: Sun Sep 06, 2015 12:29 am
by Mitch1100
Is that your own rear hugger?
Posted: Sun Sep 06, 2015 10:38 am
by beachcomber
Mitch1100 wrote:Is that your own rear hugger?
Yes, however we are not happy with the current attachment, and there will also be some other subtle changes to protect the innocent.
A couple of weeks should see the new hardware back at the farm and the new moulds completed.
