www.boxertrix.com

I think these two used to work at the small BMW dealership in Stroud that closed.

Stroud Motorcycle Company Ltd
Unit 10
Stroud Enterprise Centre
Bath Road
Stroud
Gloucestershire
GL5 3NL

Phone: (01453) 297170
Servicing: mike@stroudmc.co.uk
Sales: tim@stroudmc.co.uk

Same here - perhaps a security certificate has expired. Does anyone know how to contact Paul?

Well, the main earth point was a challenge to 'service' without removing the tank! Good enough tho' until I have it all apart one day. Definitely improved matters - fingers crossed that my misfires have gone...
Thanks for the suggestions

Thanks - right on track as I'm getting that first stab click from the starter, then all ok on the second go (new battery made no difference). I started up with 1 plug per side this evening, then the other two plugs and it's running perfectly like that and (not surprisingly) with all 4. Earth connect...

Thanks Humbug. Yes, I wasn't thinking clearly about the 2 plugs per cylinder being harder than one! Valve clearances are ok - the misfire is very abrupt, hence my strong feeling that it's electrical. Will also check all earthing points for corrosion, especially the ECU.

2 plugs per cylinder is a bit of a pain to diagnose when you've got a misfire! Thought I'd sorted it with new plugs - possibly only one needed - but it's back after 1 ride, so I'm thinking coil pack... It's only done 11500mls, so can it really have a failure(s)? I'd like to find a local repair place...

Mitch1100 wrote:Highly reccomend MICHELIN Road 5 best tyre I've had

+1 for the Road 5s on mine too. Turns nicely and feel good.
I fancied Metzeler Roadtec 01SE to replace my equally aged Conti Sport Attacks that it came with last year but were out of stock at the time. The Road 5 looks very similar.

Well, I can't fault Steve Turner's powder coating. Tyre bloke was impressed too

I picked up my 12S wheels today - powder coated & lacquered by Steve at TPCS (as above) and will be having tyres fitted on Friday. I'll let you know what my friendly mobile tyre fitter says about them...

Looks like a good 'un - low mileage & very clean, plus the very-useful panniers...

Neil178 wrote:...Not long until it’s here...

It's here - saw my first E10 pump in the Guildford area yesterday...

Thanks for that useful link ☺️

All done - M8 tapped into the Helibar + a stubby bracket with an Aluminium, 3D-printed round section put my existing cheapie bar-mount for the phone in exactly the right place. I'd bung a photo here but I can't make any 'small' enough! Thanks for all the useful suggestions. Update... PXL_20210804_17...

Great, thanks. That'll do it

Ah, nice idea as the bar end is in clear space. Pic would be great to confirm I'm on the same track...