My brother had a daft idea earlier in the year and arranged a family get together near Girona at the beginning of October and I thought I'd take a different route to everyone else and have a ferry booked to Bilbao for next Tuesday on the Boxer Cup.
I aim to take a slow ride to the WSB in Aragon (no ...
Search found 70 matches
- Thu Sep 19, 2024 11:25 pm
- Forum: Ride Reports
- Topic: Going to Spain Next Week
- Replies: 2
- Views: 14134
- Sat Oct 28, 2023 9:29 pm
- Forum: Boxerbanter
- Topic: ACF50
- Replies: 10
- Views: 12770
Re: ACF50
Yea that's what I was talking about, a trigger/hand sprayer not an aerosol, much easier to control than an aerosol or pouring it out of the bottle.
- Fri Oct 27, 2023 10:17 am
- Forum: Boxerbanter
- Topic: ACF50
- Replies: 10
- Views: 12770
Re: ACF50
I see that Sportsbike shop have an offer (MCN) of 25% off for a bottle of ACF50 with a hand sprayer, I've been using this for the last 3 yrs or so spraying into a small paint brush & applying where I want as well as spraying into inaccessible spots.
Works well, attracts a little dust onto ...
Works well, attracts a little dust onto ...
- Fri May 20, 2022 8:49 pm
- Forum: Boxertech
- Topic: Anyone fitted Barbacks to BCR-how long cables?
- Replies: 7
- Views: 12142
Re: Anyone fitted Barbacks to BCR-how long cables?
Ah well, managed to get a bit farther.. ordered longer cables and an adaptation to the throttle cable outlet at the handlebars (they call it a repair kit) & replaced the originals, had to come from the fatherland, all a success in the end.... but what a palaver fitting them!
Re-installed the 'Bar ...
Re-installed the 'Bar ...
- Fri Apr 29, 2022 10:05 am
- Forum: Boxertech
- Topic: Anyone fitted Barbacks to BCR-how long cables?
- Replies: 7
- Views: 12142
Re: Anyone fitted Barbacks to BCR-how long cables?
I have the short paralever arm, but if I used the longer one to reduce the rear height wouldn't it just rake out the front & slow the steering?
When I bought the bike it had Ohlins fitted & steered like a barge so while giving the bike a good service took the shocks to a suspension specialist (in ...
When I bought the bike it had Ohlins fitted & steered like a barge so while giving the bike a good service took the shocks to a suspension specialist (in ...
- Wed Apr 27, 2022 8:32 pm
- Forum: Boxertech
- Topic: Anyone fitted Barbacks to BCR-how long cables?
- Replies: 7
- Views: 12142
Re: Anyone fitted Barbacks to BCR-how long cables?
Thanks for the replies,
I had previously raised the bars above the yokes & replaced the brake hoses a few years ago (HEL I think) & managed without changing the cables, but got it into my head the other day that the 'bar backs' would give me more comfort in my old age (72) & ordered them.
Couldn ...
I had previously raised the bars above the yokes & replaced the brake hoses a few years ago (HEL I think) & managed without changing the cables, but got it into my head the other day that the 'bar backs' would give me more comfort in my old age (72) & ordered them.
Couldn ...
- Tue Apr 26, 2022 2:30 pm
- Forum: Boxertech
- Topic: Anyone fitted Barbacks to BCR-how long cables?
- Replies: 7
- Views: 12142
Anyone fitted Barbacks to BCR-how long cables?
Just bought some barbacks (Moto CNC) for my Boxercup & find the throttle & choke cables are now too short.
Looked at all the regular suppliers on the web & no longer ones are listed, Spoke with Motorworks they have standard upper cables at 570mm & are looking to see if they can get longer ones ...
Looked at all the regular suppliers on the web & no longer ones are listed, Spoke with Motorworks they have standard upper cables at 570mm & are looking to see if they can get longer ones ...
- Mon Apr 26, 2021 10:26 pm
- Forum: Bits'n'bobs for sale
- Topic: Moving house.... 1100S bits from the loft
- Replies: 12
- Views: 9895
Re: Moving house.... 1100S bits from the loft
Have sent you a message re:pannier lids.
Rob
Rob
Re: Screen.
I have the taller BMW screen with bars above the yoke on BCR, much better than the standard screen (which was terrible), very comfortable & quiet. I'm trying various earplugs now & surprising how different they can be.
- Sat May 26, 2018 11:22 am
- Forum: Boxerbanter
- Topic: GDPR Fatigue
- Replies: 3
- Views: 5486
Re: GDPR Fatigue
I thought that you had to 'opt in' & by not replying you were declining the offer to receive further info, have I got this wrong?
- Mon Apr 30, 2018 11:45 am
- Forum: Bits'n'bobs for sale
- Topic: Various BCR bits for sale....
- Replies: 8
- Views: 11021
Re: Various BCR bits for sale....
Hi Bob,
I'm interested in the Bagster tank cover & Corbin seat (if it doesn't go). Can pop up on a clear day as I'm near Huntingdon.
Rob
I'm interested in the Bagster tank cover & Corbin seat (if it doesn't go). Can pop up on a clear day as I'm near Huntingdon.
Rob
- Fri Aug 11, 2017 1:28 pm
- Forum: Boxerbanter
- Topic: Tracker
- Replies: 7
- Views: 9134
Re: Tracker
Not sure I agree, recently had a classic car stolen, the tracker co. called a soon as movement was detected, it was located in a lockup and recovered in the morning after police had installed discreet surveilance in the area (so they said), they also asked to keep the car for forensic tests.
After ...
After ...
- Thu May 18, 2017 7:11 pm
- Forum: Boxertech
- Topic: non-starter R1100S all of a sudden! - won't turn over as if battery is flat, but its not.
- Replies: 22
- Views: 19152
Re: non-starter R1100S all of a sudden! - won't turn over as if battery is flat, but its not.
Check that you have the insulation under the springs for the brushes otherwise the spring short circuits between the brushes, I had the same problem & the insulators had gone adrift.
Rob
Rob
- Sat Apr 22, 2017 9:43 am
- Forum: Boxertech
- Topic: non-starter R1100S all of a sudden! - won't turn over as if battery is flat, but its not.
- Replies: 22
- Views: 19152
Re: non-starter R1100S all of a sudden! - won't turn over as if battery is flat, but its not.
Did you ever sort out the starter?
I had the same problem a couple of years ago & it was the steel disc covering the reduction gear which had come adrift & was shorting out the armature windings (as in the link previously posted).
Fixed it but had more problems & it was due to the bits of plastic ...
I had the same problem a couple of years ago & it was the steel disc covering the reduction gear which had come adrift & was shorting out the armature windings (as in the link previously posted).
Fixed it but had more problems & it was due to the bits of plastic ...